Alphalon® 40

Grupa Kapitałowa Grupa Azoty

Choose a company

Alphalon® (PA6)

Alphalon® 24 Alphalon® 25 Alphalon® 27 Alphalon® 27 C Alphalon® 27D Alphalon® 27LN Alphalon® 32 Alphalon® 33 Alphalon® 33L Alphalon® 33LN/2F Alphalon® 36 Alphalon® 36L Alphalon® 36LN/2F Alphalon® 40 Alphalon® 40L Alphalon® 40LN/2F Alphalon® E40T

Alphalon® – is the trademark of high quality polyamide 6 (PA6) – available in a wide range of relative viscosities, in modified and not modified varieties.
Alphalon® is used in the manufacture of packaging film and monofilaments, and as an engineering plastic for the automotive, electrical engineering and household product industries.
The main modified varieties include:L – lubricatedLN – lubricated and nucleatedT – heat-stabilizedand other modifications according to the customer’s specific requirements.

Alphalon® 40

Trade name: Alphalon® 40
Chemical name: polycaprolactam
Common name: polyamide 6 (PA6)

Grupa Azoty ATT Polymers
Grupa Azoty S.A. (Tarnów)

Alphalon® 40 is a bright polyamide 6 grade of high viscosity that is suited for the production of films and monofilaments.

Chip propertiesSee more

	Unit	Value	Test method
Relative viscosity (RV)		4.0 ⊥ 0.05	ISO 307 - 1% in 96% H₂SO₄
Viscosity number	ml/g	250	ISO 307 - 0,5% in 96% H₂SO₄
Melting point	°C	220	ISO 3146
Density	g/cm³	1.13	ISO 1183
Chip shape		cylindrical
Chip size	mm	2.5
Moisture content	%	≤ 0.05	ISO 15512
Extract content	%	< 0.64	internal

Food legislationSee more

Certificates regarding the status will be provided on request.

Supply form and storageSee more

Alphalon® 40 is supplied pre-dried and ready for processing in a variety of moisture proof bags, bigbags, octabins and bulk containers.

The delivered material has to be protected against moisture during storage. A storage time of 6 months should not be exceeded. The packed material should be stored in dry rooms. Open packages, if not fully emptied, should be carefully closed and sealed. Bulk material should be stored in silos under nitrogen

Important note See more

The information contained herein is based on the present state of our knowledge and experience. It does not imply any legally binding warranty of certain properties or suitability of the product for a specific purpose. In view of the many factors that may influence processing and application users should in any case run their own tests to determine the suitability of the product for their particular purpose. Users of our product must assume responsibility for observing existing proprietary rights, laws and regulations.

CONTACT WITH SUPPORT

Plastics Business Unit

Tech support

tel.: +48 14 637 49 86; +48 14 637 22 67
fax: +48 14 637 28 01

##ildgonlpapqdgpidgxjb#at#vgjeppodin.rdb##

Plastics Business Unit

Sales information

tel.: +48 14 637 33 10
fax: +48 14 637 33 28

##ildgonlp#at#vgjeppodin.rdb##

Grupa Azoty ATT Polymers GmbH

Tech support

tel.: +49(0)3561 620 5703
fax: +49(0)3561 620 5752

##gdqtgi.qtscpgtz#at#vgjeppodin.rdb##

Grupa Azoty ATT Polymers GmbH

Sales information

tel.: +49(0)40 386 801 511
fax: +49(0)40 386 801 515

return