Grupa Kapitałowa Grupa Azoty
Choose a company
Tarnamid® A (PA66)
Tarnamid® A (PA66)

Trade name: Tarnamid® A – modified grades
Chemical name: polyamide 66 (PA66)
PKWiU – 20.16.54.
PKWiU – 2 24.16.54-50.1(for tax purposes)

Tarnamid® A (PA 66) is a range of modified engineering plastics in granulated form, produced from polyamide 66 (PA66), for manufacturing by injection moulding.

The main properties of Tarnamid® A are:See more
  • high thermal resistance, 
  • mechanical strength and rigidity, 
  • excellent processing properties.
Applications and useSee more
  • fibreglass reinforced grades – used in manufacturing parts with increased mechanical strength and rigidity, especially in the automotive industry, electrical engineering, machine parts,
  • grades with mineral filler – used in manufacturing parts with increased rigidity and dimensional stability,
  • flame-retardant halogen-free grades – used in manufacturing of parts in electrical engineering and electronics with decreased flammability; does not release toxic gases during burning and are not susceptible to releasing smoke,
  • non-reinforced grades – used in the automotive industry, electrical engineering, machine parts, furniture industry and production of film; available in natural colour or as agreed upon with consumer,
  • impact resistant grades – used in automotive industry, for manufacturing of machine parts, in the furniture industry, characterized by greater impact resistance, also in the dry state,
  • grades with improved sliding properties – used in friction pairs; characterized by low friction coefficient and increased wear resistance.
Packing and transportSee more
Tarnamid® A is packed into:
  • ALU/PE welded bags, with the net weight of 25 kg, which are formed on pallets with weight up to 1000 kg and wrapped with stretch foil, 
  • into octabins with net mass up to 1000 kg,
  • other kind of packaging agreed with customer.
Loading units on pallets are wrapped in stretch foil.
Tarnamid® A should be transported in covered means of transport 
Transport conditions should protect the bags from damage, moisture and impurities. The piling of pallets is not allowed. 
Tarnamid® A is not a hazardous product according to ADR, RID and IMDG regulations.
StorageSee more
Tarnamid®A should be stored in closed original packaging of the producer in dry rooms with temperature 10-300C, and at least 1m away from heating devices. 
The bags with granulate should be transferred from the cold storage room into the warm workshop about 24 hrs before the material is to be used, to balance the temperatures and prevent moisture condensation. 
Service and supportSee more
Striving to provide the highest standard of customer service, Grupa Azoty S.A. offers professional support for as part of customer service for plastics consumers.
Service includes:
  • conducting R&D work in the field of caprolactam and plastics in order to improve the quality of products and processes, developing new quality, technological and application solutions, 
  • developing new grades of plastics,
  • managing product development in terms of quality and cost,
  • manufacturing pilot runs of new and improved products for testing by potential customers,
  • improving the quality of plastics based on new technological solutions and customers' comments and opinions,
  • technological support for customers during new plastics' implementation,
  • developing technical information about products and their application potential,
  • training, technical support, certification support,
  • conducting new project development with the customer,
  • technological support for clients in the event of processing and application problems with the supplied material
  • participation in determining the validity of and reasons for complaints, according to the process regulated by Grupa Azoty S.A.'s PJ-806 "Customer Complaints" procedure,
  • plastic quality control according to customer requirements,
  • additional testing required by the client and not included in the technical questionnaires,
  • testing and certification of plastics according to customer requirements as well as the relevant regulations and directives at domestic and foreign institutions,
  • quality compliance declarations in accordance with the relevant regulations, directives and requirements: REACH, contact with food and potable water, testing for banned substances,
  • analysis of non-standard customer enquiries,
  • analysis of customers' technical specifications and quality standards.
Plastics Business Unit
Tech support
Plastics Business Unit
Sales information
Full offer